What To Do If Your Water Heater Suddenly Stops Working
What To Do If Your Water Heater Suddenly Stops Working
Blog Article
They are making a few great points related to What Would Cause My Electric Water Heater to Stop Working? as a whole in the article on the next paragraphs.
Lots of modern houses utilize an electrical water heater for their heater, due to its benefit and also simplicity of use. Nonetheless, much like any other electric home appliances, troubles may emerge with its usage, all of a sudden. It can be really irritating to wake up to a cool shower as opposed to a warm one or having your bath with water that isn't warm enough or perhaps too warm. Whatever the instance may be, hot water heater problems can be rather aggravating. Thankfully, we have actually made a listing of feasible solutions to your water heater problems. There are a variety of factors that could trigger most of these problems, it could be a problem with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you shut off the primary power supply for safety and security. Whatever the problem is, getting it fixed ought to not present way too much of a concern if you follow these steps:
Call An Expert:
If after changing all damaged components and resetting your temperature, the water heater still isn't working, you may need to call a specialist plumber for a specialist point of view. The problem with your heater could be that the hot and cold taps have been switched or it may be undersized for the amount of hot water needed in your home. Whatever the situation may be, an expert plumber would assist fix the issue.
Inspect Your Power Supply:
As fundamental as this might seem, it is extremely needed. Without appropriate power, your hot water heater will certainly not work. So the first thing to do when your water all of a sudden stops working is to verify that it isn't a power problem. Check if the fuse is blown out or the circuit breaker tripped. If the breaker is the concern, merely transform it on and off once again. Replace any type of broken or worn-out fuse. Test the device with power after these adjustments to see if it's currently functioning.
Inspect Your Thermostat:
If your water heater still isn't working or the water coming out isn't warm sufficient, you might need to check the temperature setups on your top thermostat. Make sure the breaker is switched off before doing anything. Open the accessibility panel and also press the red button for temperature reset above the thermostat. This need to aid heat up the water. Turn the circuit breaker back on and also inspect if the issue has been resolved.
Examine the Burner in the Water Heater:
If it's not a power problem, after that attempt having a look at your heating element if it is still functioning. Check each of your heating elements to be sure the trouble isn't with any of them. If any of them is damaged, change that part and afterwards examine whether the hot water is back on.
Conclusion
Hot water heater issues are not always significant. A number of them result from small issues like a blown fuse or damaged heating element. Changing the defective components must do the trick. Nonetheless, if you are still not able to solve the trouble, give a call to your closest plumber ahead to get it taken care of.
8 possible reasons why you have no Hot Water
Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.
Water Leak
Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.
Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.
Gas Heater: Gas Leak
If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.
Gas Heater: Pilot Light Problems
There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.
Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.
Gas Heater: Faulty Thermocouple
The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.
Electric Heater: Breaker Blues
Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.
Electric Heater: Reaching The Limit
If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.
Electric Heater: Heating Element
If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.
https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/
We hope you liked our part about How to Troubleshoot and Repair an Electric Water Heater. Thanks a ton for taking the time to read our post. Sharing is nice. You just don't know, you may very well be helping someone out. Kudos for your time. Visit us again soon.
Schedule A Free Estimate
Report this page